Licensed electricians based in Point Cook, serving Wyndham and Melbourne's west
Mon–Thu on site · Fri office0461 312 053

Core Wyndham suburbs

Point CookTarneitWerribeeHoppers CrossingTruganinaWilliams Landing

Nearby suburbs

Wyndham Vale & Manor LakesLavertonAltona Meadows & SeabrookDerrimut

Based in Point Cook. Our warehouse on Linmax Court is a short drive from Tarneit, Werribee, Hoppers Crossing, Truganina and Williams Landing.

See all service areas →
Switchboard upgrades · Melbourne's west

Switchboard Upgrades and Old Fuse Box Replacement

Circuit breakers · safety switches · ready for solar, batteries and EVs

Many homes in Werribee, Hoppers Crossing and Altona Meadows still run on ceramic fuses and a single safety switch. Teksol replaces old fuse boxes with modern switchboards that protect every circuit and have room for what's next, with a written, locked-in quote before we start.

  • 5.0 Google rating
  • 10 yearsWiring Wyndham since 2016
  • Locked-inWritten, fixed quotes
Electrician working on wiring at a switchboard
Switchboard work
Electrician carrying out an electrical safety check
Safety check first
Electrician testing a circuit
Tested and certified
Registered Electrical ContractorREC 26543 · Fully insured
  • Locked-in quotesWritten, itemised price that only changes if the job does
  • On time, every timeWe arrive when we say, or we call ahead
  • Licensed and insuredRegistered Electrical Contractor, REC 26543
  • Tested and certifiedCertificate of Electrical Safety where required

Warning signs

Signs Your Switchboard Needs Upgrading

If any of these sound familiar, it's worth having the board checked.

Ceramic fuses

Old rewireable fuses instead of circuit breakers, usually in homes built before the 1990s.

One safety switch, or none

Only the power points protected, with lights and appliances left without RCD protection.

Fuses blowing or tripping

Power cutting out when the kettle, heater or air conditioner turns on.

Heat, buzzing or burning smell

A warm board, scorch marks or a burning smell. Switch off and call us straight away.

No room for new circuits

No space for an air conditioner, EV charger or induction cooktop circuit.

Adding solar, a battery or an EV

New equipment often needs space, protection and capacity the old board doesn't have.

Explained

Fuses vs Circuit Breakers and RCDs

Three devices, three different jobs. A modern board has the right one in the right place.

DeviceWhat it protects againstWhat happens when it trips
Rewireable fuseOverloads and short circuits on a circuitThe fuse wire melts and has to be replaced by hand
Circuit breakerOverloads and short circuits on a circuitIt switches off and can be reset once the fault is fixed
RCD (safety switch)Current leaking to earth, such as through a personCuts power in a fraction of a second to help prevent electric shock
RCBOBoth: a circuit breaker and RCD in oneOnly the faulty circuit switches off, so the rest of the house stays on
Electrician wiring new equipment at a switchboardSpace left for what's next

Future-ready

Upgrading for Solar, Batteries or EV

Solar, home batteries, EV chargers and induction cooktops all add load and need their own protection.

  • Spare space in the board for new circuits
  • RCD or RCBO protection on every circuit
  • Capacity checked against your supply, with a mains or meter box upgrade if needed
  • Clear labels so you know which breaker does what

Planning a charger? See EV charger installation and our switchboard upgrade cost guide.

Step by step

What the Upgrade Involves

A typical home switchboard upgrade takes around a day.

Electrician inspecting a home

STEP 01

Inspect and quote

We inspect the old board, the wiring and your supply, then give you a written, itemised quote.

Steps change every 5 seconds

Pricing

What Affects the Cost of a Switchboard Upgrade

We give you a fixed price after an inspection. These are the things that change it.

Number of circuits

More circuits mean a bigger board and more RCBOs or safety switches.

Condition of the wiring

Old or damaged cabling found during the upgrade may need repairs before the new board can be connected.

Supply and meter box

Some homes also need a mains cable or meter box upgrade, coordinated with Powercor.

What you're adding

Room for solar, a battery or an EV charger now saves another upgrade later.

FAQs

Switchboard Upgrade FAQs

How do I know if my switchboard needs upgrading?

Common signs are ceramic fuses instead of circuit breakers, only one safety switch (or none), fuses that blow often, a board that feels warm or smells of burning, or no space for new circuits. If you're adding solar, a battery, an EV charger or an induction cooktop, it's worth checking.

What's the difference between a fuse, a circuit breaker and an RCD?

A fuse is a wire that melts when a circuit is overloaded, and has to be replaced. A circuit breaker does the same job but simply switches off and can be reset. An RCD (safety switch) is different again: it detects current leaking to earth, for example through a person, and cuts the power in a fraction of a second.

How long does a switchboard upgrade take?

Most homes take around a day, with the power off for part of it. We'll tell you how long you'll be without power when we quote, and book a time that suits you.

Do I need a mains or meter box upgrade too?

Sometimes. If the supply cable to your house or the meter box is old or too small for what you're adding, it may need upgrading as well. Work on the supply side is coordinated with Powercor, the distributor for Wyndham.

Will I get a Certificate of Electrical Safety?

Yes. A switchboard upgrade is prescribed electrical work in Victoria, and we issue a Certificate of Electrical Safety once it's finished and tested.

Switchboard upgrades across Melbourne's west. Based in Point Cook and working in Tarneit, Werribee and the rest of Wyndham every week.

Get a quote

Get a Locked-In Switchboard Quote

Send a photo of your switchboard with the cover open and tell us what you're planning to add. We'll tell you what's needed before we quote.

  • Written, itemised quote before any work starts
  • Licensed electricians, based in Point Cook
  • Certificate of Electrical Safety where required

Want to check us out first? Read about Teksol, our licences and team, or use the contact page to send photos and plans.

Request your free quote

We only use your details to reply to your enquiry.