Licensed electricians based in Point Cook, serving Wyndham and Melbourne's west
Mon–Thu on site · Fri office0461 312 053

Core Wyndham suburbs

Point CookTarneitWerribeeHoppers CrossingTruganinaWilliams Landing

Nearby suburbs

Wyndham Vale & Manor LakesLavertonAltona Meadows & SeabrookDerrimut

Based in Point Cook. Our warehouse on Linmax Court is a short drive from Tarneit, Werribee, Hoppers Crossing, Truganina and Williams Landing.

See all service areas →
New home electrician · Wyndham and Melbourne's west

New Home Electrical Wiring, From Plans to Handover

Plan review · rough-in · fit-off · Certificate of Electrical Safety

New homes are where Teksol started. We wire new builds for builders and owners across Point Cook, Tarneit, Truganina and Werribee, from the first plan review to the final test, turning up on time at every stage so the build keeps moving.

  • 5.0 Google rating
  • 10 yearsWiring Wyndham since 2016
  • Locked-inWritten, fixed quotes
Teksol electrician fitting off a switch in a new home
New home fit-off
Electrician installing pendant lights in a new home
Lighting
Network cabinet wired in a new home
Data and network
Registered Electrical ContractorREC 26543 · Fully insured
  • Locked-in quotesWritten, itemised price that only changes if the job does
  • On time, every timeWe arrive when we say, or we call ahead
  • Licensed and insuredRegistered Electrical Contractor, REC 26543
  • Tested and certifiedCertificate of Electrical Safety where required

Trusted by Melbourne home builders

  • Grand Arch Homes logo
  • Altus Homes logo
  • Verso Group logo
  • MAC Melbourne Architectural Constructions logo
  • Art Residence by MAC logo

From plans to handover

Every Stage of Your New Home

Here's what happens at each stage of the build, and what you should decide before it.

  1. 01

    Electrical Plan Review Before SlabBefore slab

    We go through your plans room by room: power points, lighting, switches, data, TV, CCTV and smart home. Anything under the slab, like a floor power point on an island bench, has to be decided now.

  2. 02

    Rough-InFrame stage

    Cables, boxes and conduits go in once the frame is up and before plaster. We mark everything clearly so the plasterers don't cover it, and we work to the builder's schedule.

  3. 03

    Lighting, Data and Smart-Ready WiringDuring rough-in

    Data points in every bedroom and the study, a network cabinet, camera locations and smart switch cabling. Done now, it costs little. Done later, it means patching walls.

  4. 04

    Fit-OffAfter painting

    Switches, power points, light fittings, exhaust fans, smoke alarms, oven and cooktop are connected, and the switchboard is finished and labelled.

  5. 05

    Certificate of Electrical SafetyBefore handover

    Every circuit is tested and the installation is certified. You get the Certificate of Electrical Safety and a walk-through of the switchboard.

Electrician terminating data cables in a network rackPre-wired before plaster

Future-ready

Lighting, Data and Smart-Ready Wiring

The cheapest time to add almost anything to a home is before the walls are lined.

  • Data points in bedrooms, study and living areas, back to one network cabinet
  • CCTV cabling to every camera location, ready for wired cameras
  • Smart switch wiring so lights and blinds can be automated later
  • Lighting plan with downlights, pendants and feature lighting placed for how you'll use each room
  • EV charger and solar-ready switchboard space
Electrician working in a newly built homeOn time at every stage

For builders

Working With Your Builder

Builders need an electrician who turns up on the day booked, keeps the site clean and doesn't hold up the next trade.

  • Locked-in contract pricing for single homes, townhouses and small developments
  • Rough-ins and fit-offs booked around your schedule
  • Clear communication with your site supervisor and the owner
  • Temporary site security cameras available during the build

Before plaster

Upgrades Worth Adding Before Plaster

The builder's standard package covers the basics. These are the upgrades our new home customers most often wish they'd added at rough-in, and the cheapest time to add them is now.

Extra and USB power points

Beside beds, in the kitchen island, in the garage and outside on the alfresco.

Better lighting

More downlights, pendants over the bench, LED strip lighting and garden lighting.

Data and TV points

Wired data to the study, TV and bedrooms, back to one network cabinet.

CCTV cabling

Cable to each camera spot now, even if the cameras go in after you move in.

EV charger circuit

A dedicated circuit to the garage so a charger can go in later without chasing walls.

Split system circuits

Power and pipe routes ready for split systems in each bedroom and the living area.

FAQs

New Home Electrical FAQs

When should I talk to an electrician about my new home?

As early as possible, ideally before the slab or before your electrical plan is signed off with the builder. That's when changes cost nothing. Once walls are lined, adding a power point or a data cable costs far more.

What's the difference between rough-in and fit-off?

Rough-in is when cables, boxes and conduits go in, after the frame is up and before plaster. Fit-off is after painting, when switches, power points, lights and appliances are connected and everything is tested.

Can you wire my house for data, CCTV and smart home?

Yes. We pre-wire data points, TV points, camera locations and smart home cabling during rough-in, so there are no exposed cables or costly add-ons later.

Do you work directly for builders?

Yes. We wire homes for builders across Melbourne's west, and we also work for owners who want upgrades on top of their builder's standard package.

Will I get a Certificate of Electrical Safety?

Yes. Every new home we wire gets a Certificate of Electrical Safety once the installation is complete and tested, which is required in Victoria.

Can you add things the builder left out after handover?

Yes. Extra power points, outdoor lighting, CCTV, ceiling fans and data points are common after-handover jobs. It's easier and cheaper when we planned the wiring at rough-in.

Do you work to the Australian wiring rules?

Yes. All of our work is done to AS/NZS 3000, the Australian and New Zealand wiring rules, and tested before handover.

Can you quote from my builder's electrical plan?

Yes. Send us the plan and your builder's electrical schedule. We'll price the work, or the upgrades on top of the builder's package, as a locked-in quote.

New home electrical across Melbourne's west. Based in Point Cook and working in Tarneit, Werribee and the rest of Wyndham every week.

Get a quote

Price Your New Home Electrical Package

Send us your plans and we'll come back with a locked-in price, including any upgrades you'd like on top of the builder's standard package.

  • Written, itemised quote before any work starts
  • Licensed electricians, based in Point Cook
  • Certificate of Electrical Safety where required

Want to check us out first? Read about Teksol, our licences and team, or use the contact page to send photos and plans.

Request your free quote

Photos or plans (optional)
We only use your details to reply to your enquiry.